Te Tino Nui
Tohu CO2
Te ngawari
3-axis mana whakahaere co2 laser marke
Tohu 3d :
Tino whakaheke i te waa huringa
W ith 3-toki te mana whakahaere, te tawhiti o te aro ki te hua kua whakaritea
e te tohu laser. Ma tenei ka whakaiti i te waa me te whakapau kaha ki te whakakii i te tawhiti o te mata ka whakaritea ki nga tauira tikanga.
Taputapu Taputapu me te whakapai ake i te whai huatanga
Ko te tohu tika me te tukatuka ka taea te neke atu i te 300 × 300 mm 11.81 '× 11.81 ' rohe. Ka whakapai ake tenei i te kaha o te whakaputa i te wa e mahi ana me te maha o nga hua i te wa kotahi.
Te kounga kore-kore me te tino tika
Kei roto i te raina te roanga-poto me te tauira kurupae angiangi mo te kounga o te tohu me te kounga tukatuka. Ko enei tauira kaore anake te whakakore i te kino o te hua kaore e hiahiatia
Engari ka whai waahi ano ki te tohu me te tukatuka me te whakaheke i te waa Takt.
Ko te KYV-460s- kua whakauruhia ki te mana 3-axis, he mahi mo te whakahaere i te laser tohu e toru-te rite ki te rite ki te ahua whaainga. Ma te kaha ki te tohu i runga i te ara, i te taha, i te cylindrical, me nga whaainga huihuinga, ko te taarua o te ahua me nga ngoikoretanga ka tiakina.
He rereke te waahi me te aukati :
Ko nga tikanga o te kurupae a te kowhatu kaore e rite ki nga tikanga, ko te raupapa KYV-460 ka taea te tohu angiangi ki te angiangi, te matotoru, te kirikiri hohonu ranei. Koinei te tikanga o te KYV-460 ka taea e te tohu te tohu i nga taera i te waahi i tetahi waahi i roto i te rohe tohu.
whanui -tikaTe rohe
Ko te 300 × 32 mm 11.81 '' '' '× 11' ' 4.65 4.65 ' 4.65 'te whanui whanui te utu mo te whakaheke i te waa e whakaiti ana i te waa whakaheke.
Hei taapiri, ko te whakahaere 3-toki e whakarite kia tae te kaupapa ki te waahi katoa mo te tohu-tika me te tukatuka.
Matrix Tohu Mahi
Tae atu ki te 65,025 nga taonga ka taea te whakarite i roto i te tahora tohu kotahi. Ma tenei ka pai ake te tohu me te tukatuka i nga waahanga maha i roto i te waahanga kotahi. Ko te raupapa KYV-460 ka taea te whakarite i nga whaainga kaore i hangaia ma te whakamahi i te whakatikatika.
Nga waahanga matua |
• Te whakamanatanga a te Fiducial |
• Kotahi / Tuarua taha taha (i hangaia-i roto i te teihana reti) - Kōwhiringa |
|
• Te huringa kounga 2D '(Barcode te whakatau tohu kounga) |
|
• Ko te mahi matua-tohu (aukati i nga PCB hē kia haere mai), ko te tohu kino |
|
• Te tohu tohu CPK> 1.67 te tika +/- 0.015mm |
|
• te kitenga o te poari |
|
• Rōpū Tohu / Tohu Tohu Aratau |
|
• Hūpeke Te Tohu + Waehere Whakaputanga mo te Whakaputanga |
|
• tohu anti-tuarua |
|
• Te tangohanga FUME (kōwhiri) |
|
• Te rama RGB (kōwhiri) |
|
• E waatea ana ki te tohu ki nga momo tae tae tae atu ki te matomato, ma, whero, pango, papura, puru .. |
|
• Te hononga mes / erp (kōwhiri) |
|
• Ko te upoko CO2 laser mai i nga waitohu matua |
|
Kāhua tohu |
XYZ 3-AXIS Silin Tikanga Tohu |
Tohu laser |
CO2 laser, akomanga 4 laser hua (IEC / en60825-1, JS C6802, FDRA (CDRH) Part1040.10 * 1) Roa Roa: 10.6 UM Mana: 30w |
Te tawhiti mahi paerewa (± whanui rereke) |
189 mm 7.44 '(± 21 mm ± 0.83 ') |
Rahi PCB (L * W) |
Rahi PCB: 510mm (l) * 460mm (w) |
Whakawātea |
Runga: 25mm me te heke iho 25mm |
Matotoru PCB |
0.6mm-5mm |
Te kawe teitei |
900 +/- 50mm (me te tohu ranei) |
Te aronga rere |
Maui ki te taha matau, ki te taha maui ki te taha maui (rite ki nga kaihoko kaihoko) |
Rahi Miihini |
1050-1960-1700mm (l * w * h) |
'Taumaha |
920kg |
Momo laser |
Ko te upoko CO2 laser |
Pōhirihiri |
10.6um |
Taumata laser |
Akomanga 4 |
Tohu max. rahi |
Co2 Laser Max. Rahi tohu: 120 * 120mm; Min. 0.2mm * 0.2mm |
Barcode: CODE39, ITF, 2of5, NW7(Codabar), JAN, CODE128, EAN, UPC-A, UPC-E, CODE93 |
|
Waehere 2D: Tohu QR, Micro QR Code, Datamatrix (ECC200 / GS1 Datamatrix) |
|
Gs1 databar: |
|
GS1 Databar, GS1 Databar CC-a, GS1 Databar i herea, |
|
GS1 databar i pakaru cc-a |
|
Moko Image |
BMP / JPEG / PNG / TIFF / CAD |
Galvanometer |
Tauira tauira matua i hangaia |
Pouaka tango whakaahua |
Hinarobot |
Pou |
RGB Maama (Kōwhiringa) |
Rorohiko |
Momo rorohiko rorohiko me te Windows 10 |
Barcode whaiaro- whakamana |
Kāmera ataata CCD taumira teitei |
Paerewa: Mark pai / Kaore he kitenga pai mo te kitenga me te whakawa |
|
Paerewa: tohu tohu. |
|
Ka taea e Vanstron Laser te miihini tohu tohu CCD ki te tirotiro i te papa o te papa hiko |
|
Mahi tohu tohu |
I muri i te tohu ki te manatoko i te taumata paetahi, ka taea e koe te whakanoho i te tirotirohanga tauira |
Papa whakahaere |
Te tautuhi aunoa me te poari 'x', kaore he whakairo |
Pūnaha Matawai |
Xy Axis taraiwa taraiwa, Z Axis Whakahaere Whakahaerehia Hanga- I roto |
Te tūranga poari |
Te Whakatau i te Whakaaturanga Camera Na te punaha matua |
Momo mahi laser |
Whakapaipai CCD CLAMD |
Te tirotiro i nga huarahi |
Ko te nekehanga a Lands |
Te tika o te Waehere |
CCD + Mark + te papa o runga o te huarahi |
Aratau Whakahaerenga Moti |
± 0.015mm (cpk> 1.67) |
Te rereketanga o te tohu tohu teitei me te iti |
PC + Axis Card + Sergo Motuka |
Mahi tinihanga |
Whirihorahia te Axis Z, ka taea te whakatika aunoa ma te rorohiko |
I te raina panui |
Whakamuri / tuara i muri |
Ko te mahi panui a Cameramera |
Paerewa: I muri i te panui i te waehere, te rokiroki o te rohe; Kōwhiringa: tukuatu ki te punaha o runga mo te tirotiro (maori) |
Mahi tohu tohu |
Maha nga panui panui, panui kotahi ranei i muri i te tohu, i te panui ranei i te tohu |
Kaihao |
Takoto |
Whakapau Edge: 4 mm |
|
Max Payload: 3 kg |
|
Ko te Whanonga Conveyor: Aunoa Whakatikatika (Papatonotanga) |
|
Te Tere Tere |
Te Tere Conveyor: 600 mm / sec. (iti) |
Nga waahanga Haumaru |
'E ' Ka mutu, te aukati laser, te paruru o te rama rama, te kitenga o te mahi a Servo, te rohe mahi kua oti te whakauru |
Nga whakaritenga mana |
AC-220V, 50 / 60Hz, 1.8kwa |
Whakaritenga Air |
0.5mpa |
Āati |
Homema |
Tangohanga fume |
Whakahaere Aunoa ma te Rorohiko Rorohiko |
Te Tino Nui
Tohu CO2
Te ngawari
3-axis mana whakahaere co2 laser marke
Tohu 3d :
Tino whakaheke i te waa huringa
W ith 3-toki te mana whakahaere, te tawhiti o te aro ki te hua kua whakaritea
e te tohu laser. Ma tenei ka whakaiti i te waa me te whakapau kaha ki te whakakii i te tawhiti o te mata ka whakaritea ki nga tauira tikanga.
Taputapu Taputapu me te whakapai ake i te whai huatanga
Ko te tohu tika me te tukatuka ka taea te neke atu i te 300 × 300 mm 11.81 '× 11.81 ' rohe. Ka whakapai ake tenei i te kaha o te whakaputa i te wa e mahi ana me te maha o nga hua i te wa kotahi.
Te kounga kore-kore me te tino tika
Kei roto i te raina te roanga-poto me te tauira kurupae angiangi mo te kounga o te tohu me te kounga tukatuka. Ko enei tauira kaore anake te whakakore i te kino o te hua kaore e hiahiatia
Engari ka whai waahi ano ki te tohu me te tukatuka me te whakaheke i te waa Takt.
Ko te KYV-460s- kua whakauruhia ki te mana 3-axis, he mahi mo te whakahaere i te laser tohu e toru-te rite ki te rite ki te ahua whaainga. Ma te kaha ki te tohu i runga i te ara, i te taha, i te cylindrical, me nga whaainga huihuinga, ko te taarua o te ahua me nga ngoikoretanga ka tiakina.
He rereke te waahi me te aukati :
Ko nga tikanga o te kurupae a te kowhatu kaore e rite ki nga tikanga, ko te raupapa KYV-460 ka taea te tohu angiangi ki te angiangi, te matotoru, te kirikiri hohonu ranei. Koinei te tikanga o te KYV-460 ka taea e te tohu te tohu i nga taera i te waahi i tetahi waahi i roto i te rohe tohu.
whanui -tikaTe rohe
Ko te 300 × 32 mm 11.81 '' '' '× 11' ' 4.65 4.65 ' 4.65 'te whanui whanui te utu mo te whakaheke i te waa e whakaiti ana i te waa whakaheke.
Hei taapiri, ko te whakahaere 3-toki e whakarite kia tae te kaupapa ki te waahi katoa mo te tohu-tika me te tukatuka.
Matrix Tohu Mahi
Tae atu ki te 65,025 nga taonga ka taea te whakarite i roto i te tahora tohu kotahi. Ma tenei ka pai ake te tohu me te tukatuka i nga waahanga maha i roto i te waahanga kotahi. Ko te raupapa KYV-460 ka taea te whakarite i nga whaainga kaore i hangaia ma te whakamahi i te whakatikatika.
Nga waahanga matua |
• Te whakamanatanga a te Fiducial |
• Kotahi / Tuarua taha taha (i hangaia-i roto i te teihana reti) - Kōwhiringa |
|
• Te huringa kounga 2D '(Barcode te whakatau tohu kounga) |
|
• Ko te mahi matua-tohu (aukati i nga PCB hē kia haere mai), ko te tohu kino |
|
• Te tohu tohu CPK> 1.67 te tika +/- 0.015mm |
|
• te kitenga o te poari |
|
• Rōpū Tohu / Tohu Tohu Aratau |
|
• Hūpeke Te Tohu + Waehere Whakaputanga mo te Whakaputanga |
|
• tohu anti-tuarua |
|
• Te tangohanga FUME (kōwhiri) |
|
• Te rama RGB (kōwhiri) |
|
• E waatea ana ki te tohu ki nga momo tae tae tae atu ki te matomato, ma, whero, pango, papura, puru .. |
|
• Te hononga mes / erp (kōwhiri) |
|
• Ko te upoko CO2 laser mai i nga waitohu matua |
|
Kāhua tohu |
XYZ 3-AXIS Silin Tikanga Tohu |
Tohu laser |
CO2 laser, akomanga 4 laser hua (IEC / en60825-1, JS C6802, FDRA (CDRH) Part1040.10 * 1) Roa Roa: 10.6 UM Mana: 30w |
Te tawhiti mahi paerewa (± whanui rereke) |
189 mm 7.44 '(± 21 mm ± 0.83 ') |
Rahi PCB (L * W) |
Rahi PCB: 510mm (l) * 460mm (w) |
Whakawātea |
Runga: 25mm me te heke iho 25mm |
Matotoru PCB |
0.6mm-5mm |
Te kawe teitei |
900 +/- 50mm (me te tohu ranei) |
Te aronga rere |
Maui ki te taha matau, ki te taha maui ki te taha maui (rite ki nga kaihoko kaihoko) |
Rahi Miihini |
1050-1960-1700mm (l * w * h) |
'Taumaha |
920kg |
Momo laser |
Ko te upoko CO2 laser |
Pōhirihiri |
10.6um |
Taumata laser |
Akomanga 4 |
Tohu max. rahi |
Co2 Laser Max. Rahi tohu: 120 * 120mm; Min. 0.2mm * 0.2mm |
Barcode: CODE39, ITF, 2of5, NW7(Codabar), JAN, CODE128, EAN, UPC-A, UPC-E, CODE93 |
|
Waehere 2D: Tohu QR, Micro QR Code, Datamatrix (ECC200 / GS1 Datamatrix) |
|
Gs1 databar: |
|
GS1 Databar, GS1 Databar CC-a, GS1 Databar i herea, |
|
GS1 databar i pakaru cc-a |
|
Moko Image |
BMP / JPEG / PNG / TIFF / CAD |
Galvanometer |
Tauira tauira matua i hangaia |
Pouaka tango whakaahua |
Hinarobot |
Pou |
RGB Maama (Kōwhiringa) |
Rorohiko |
Momo rorohiko rorohiko me te Windows 10 |
Barcode whaiaro- whakamana |
Kāmera ataata CCD taumira teitei |
Paerewa: Mark pai / Kaore he kitenga pai mo te kitenga me te whakawa |
|
Paerewa: tohu tohu. |
|
Ka taea e Vanstron Laser te miihini tohu tohu CCD ki te tirotiro i te papa o te papa hiko |
|
Mahi tohu tohu |
I muri i te tohu ki te manatoko i te taumata paetahi, ka taea e koe te whakanoho i te tirotirohanga tauira |
Papa whakahaere |
Te tautuhi aunoa me te poari 'x', kaore he whakairo |
Pūnaha Matawai |
Xy Axis taraiwa taraiwa, Z Axis Whakahaere Whakahaerehia Hanga- I roto |
Te tūranga poari |
Te Whakatau i te Whakaaturanga Camera Na te punaha matua |
Momo mahi laser |
Whakapaipai CCD CLAMD |
Te tirotiro i nga huarahi |
Ko te nekehanga a Lands |
Te tika o te Waehere |
CCD + Mark + te papa o runga o te huarahi |
Aratau Whakahaerenga Moti |
± 0.015mm (cpk> 1.67) |
Te rereketanga o te tohu tohu teitei me te iti |
PC + Axis Card + Sergo Motuka |
Mahi tinihanga |
Whirihorahia te Axis Z, ka taea te whakatika aunoa ma te rorohiko |
I te raina panui |
Whakamuri / tuara i muri |
Ko te mahi panui a Cameramera |
Paerewa: I muri i te panui i te waehere, te rokiroki o te rohe; Kōwhiringa: tukuatu ki te punaha o runga mo te tirotiro (maori) |
Mahi tohu tohu |
Maha nga panui panui, panui kotahi ranei i muri i te tohu, i te panui ranei i te tohu |
Kaihao |
Takoto |
Whakapau Edge: 4 mm |
|
Max Payload: 3 kg |
|
Ko te Whanonga Conveyor: Aunoa Whakatikatika (Papatonotanga) |
|
Te Tere Tere |
Te Tere Conveyor: 600 mm / sec. (iti) |
Nga waahanga Haumaru |
'E ' Ka mutu, te aukati laser, te paruru o te rama rama, te kitenga o te mahi a Servo, te rohe mahi kua oti te whakauru |
Nga whakaritenga mana |
AC-220V, 50 / 60Hz, 1.8kwa |
Whakaritenga Air |
0.5mpa |
Āati |
Homema |
Tangohanga fume |
Whakahaere Aunoa ma te Rorohiko Rorohiko |
