Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
Key words
Bare boards Destacker for PCB
Product Video
- Product Description
- Product Video
-
Description
This unit is design for loading the bare boards onto the SMT line. Unique separation cams take one PCB from the bottom of the boards stacked, and softly lowering it on the ESD belts to transfer to downstream machine.
Features
Mitsubishi PLC program control
By-pass and destacker mode are selectable in the software
Shortest loading cycle time for PCB
Thickness 0.6 mm PCB available to be handled
Uninterrupted PCB charging
Pre-signal alarm for PCB lower stack heights
Use the friendly touch screen panel
Smooth and parallel width adjustment by crank wheel ( Optional: motorized).
Interlock for all door open to improvement highest safety operation
SMEMA compatible
Transfer heights
900mm+/-50mm
Transfer direction
Left to right
Operation side
Front of machine
Fixed rail
Front of machine
Interface
SMEMA
PCB working cycle time
3s-7s ( adjustable)
Conveyor belts
ESD flat belt
PCB edge support
3mm
Components clearance
20mm below and above
PCB thickness available
0.6mm-3.5mm
PCB stack heights
240mm / specify
Air supply
4-6 bar
Safety
CE certificates
Control
PLC
Voltage
220V/ 110V , single phase, 50-60Hz
Optional
• Motorized adjustment
• Automatic adjustment
• Extension for convenient stack loading
• Cantilevered input and output conveyor
Specification
Model
DL-460
Machine dimensions
650*885*1250
Weight
150KG
PCB size
50-500MM (L)
50MM-460MM (W)
PCB thickness
0.6mm-2.5mm
- Bare boards destacker conveyors
- bare boards loader
- pcb loaders
- pcb bare boards destacker
- pcb loaders
- bare boards loader for pcb
- smt boards loader
- pcb destacker
- inline PCB destacker
- pcb conveyors loader
Bare boards Destacker for PCB
- Product Description
- Product Video
-
Description
This unit is design for loading the bare boards onto the SMT line. Unique separation cams take one PCB from the bottom of the boards stacked, and softly lowering it on the ESD belts to transfer to downstream machine.
Features
Mitsubishi PLC program control
By-pass and destacker mode are selectable in the software
Shortest loading cycle time for PCB
Thickness 0.6 mm PCB available to be handled
Uninterrupted PCB charging
Pre-signal alarm for PCB lower stack heights
Use the friendly touch screen panel
Smooth and parallel width adjustment by crank wheel ( Optional: motorized).
Interlock for all door open to improvement highest safety operation
SMEMA compatible
Transfer heights
900mm+/-50mm
Transfer direction
Left to right
Operation side
Front of machine
Fixed rail
Front of machine
Interface
SMEMA
PCB working cycle time
3s-7s ( adjustable)
Conveyor belts
ESD flat belt
PCB edge support
3mm
Components clearance
20mm below and above
PCB thickness available
0.6mm-3.5mm
PCB stack heights
240mm / specify
Air supply
4-6 bar
Safety
CE certificates
Control
PLC
Voltage
220V/ 110V , single phase, 50-60Hz
Optional
• Motorized adjustment
• Automatic adjustment
• Extension for convenient stack loading
• Cantilevered input and output conveyor
Specification
Model
DL-460
Machine dimensions
650*885*1250
Weight
150KG
PCB size
50-500MM (L)
50MM-460MM (W)
PCB thickness
0.6mm-2.5mm
- Bare boards destacker conveyors
- bare boards loader
- pcb loaders
- pcb bare boards destacker
- pcb loaders
- bare boards loader for pcb
- smt boards loader
- pcb destacker
- inline PCB destacker
- pcb conveyors loader
