Description
This unit is design for loading the bare boards onto the SMT line. Unique separation cams take one PCB from the bottom of the boards stacked, and softly lowering it on the ESD belts to transfer to downstream machine.
1.Used in SMT line front, sends stacked PCB to downstream machine.
Optional #1:RS-485 communications options ( automatic width adjustment – follow-me )
Optional #2:Motorized width adjustment
Optional #3:Center master software options with Ethernet communication (automatic width adjustment )
Optional #4:IPC Hermes communication ( automatic width adjustment )
Optional #5:Ethernet TCP/IP communicate ( automatic width adjustment )
Availability: | |
---|---|
Quantity: | |
Vanstron
Features
• Mitsubishi PLC program control
• By-pass and Destacker mode are selectable in the software
• Shortest loading cycle time for PCB
• Thickness 0.6 mm PCB available to be handled well
• Uninterrupted PCB charging
• Pre-signal alarm for PCB lower stack heights
• Use the friendly touch screen panel
• Smooth and parallel width adjustment by crank wheel ( Optional: motorized).
• Interlock for all door open to improvement highest safety operation
• SMEMA compatible
Transfer heights | 900mm+/-50mm |
Transfer direction | Left to right |
Operation side | Front of machine |
Fixed rail | Front of machine |
Interface | SMEMA |
PCB working cycle time | 3s-7s ( adjustable) |
Conveyor belts | ESD flat belt |
PCB edge support | 3mm |
Components clearance | 20mm below and above |
PCB thickness available | 0.6mm-3.5mm |
PCB stack heights | 240mm / specify |
Air supply | 4-6 bar |
Safety | CE certificates |
Control | PLC |
Voltage | 220V/ 110V , single phase, 50-60Hz |
Specification
Model | DL-460 |
Machine dimensions | 603*885*1250 |
Weight | 150KG |
PCB size | 50-500MM (L)-50MM-460MM (W) |
PCB thickness | 0.6mm-2.5mm |
Optional #1 | RS-485 communications options ( automatic width adjustment – follow-me ) |
Optional #2 | Motorized width adjustment |
Optional #3 | Center master software options with Ethernet communication (automatic width adjustment ) |
Optional #4 | IPC Hermes communication ( automatic width adjustment ) |
Optional #5 | Ethernet TCP/IP communicate ( automatic width adjustment ) |
Features
• Mitsubishi PLC program control
• By-pass and Destacker mode are selectable in the software
• Shortest loading cycle time for PCB
• Thickness 0.6 mm PCB available to be handled well
• Uninterrupted PCB charging
• Pre-signal alarm for PCB lower stack heights
• Use the friendly touch screen panel
• Smooth and parallel width adjustment by crank wheel ( Optional: motorized).
• Interlock for all door open to improvement highest safety operation
• SMEMA compatible
Transfer heights | 900mm+/-50mm |
Transfer direction | Left to right |
Operation side | Front of machine |
Fixed rail | Front of machine |
Interface | SMEMA |
PCB working cycle time | 3s-7s ( adjustable) |
Conveyor belts | ESD flat belt |
PCB edge support | 3mm |
Components clearance | 20mm below and above |
PCB thickness available | 0.6mm-3.5mm |
PCB stack heights | 240mm / specify |
Air supply | 4-6 bar |
Safety | CE certificates |
Control | PLC |
Voltage | 220V/ 110V , single phase, 50-60Hz |
Specification
Model | DL-460 |
Machine dimensions | 603*885*1250 |
Weight | 150KG |
PCB size | 50-500MM (L)-50MM-460MM (W) |
PCB thickness | 0.6mm-2.5mm |
Optional #1 | RS-485 communications options ( automatic width adjustment – follow-me ) |
Optional #2 | Motorized width adjustment |
Optional #3 | Center master software options with Ethernet communication (automatic width adjustment ) |
Optional #4 | IPC Hermes communication ( automatic width adjustment ) |
Optional #5 | Ethernet TCP/IP communicate ( automatic width adjustment ) |